2pcs Nylon D loop rope Long Archery Release Bow String Nock Bowstring 1m Black

Description

The D Loop is a piece of cord attached by cinch knots to the bowstring which surrounds the arrow in the shape of a “D” and is the point of connection for an archery release.
Pro made D loop rope, you should made it by yourself.
Color: Black
Material: Nylon
Diameter:3mm
Quantity: 2 meter cord to make 20pcs D loop( it need about 6cm to make 1pcs d loop, we will send 4cm more for per D loop for you revise the knot)
How to made the D loop:
Find your target “tie in” location by using a bow square.With the bow square, cut the berger hole in half and mark an 1/8 inch
high of the perpendicular location provided by the bow square with a permanent marker.
Cut a piece of D-Loop cord at least 4 1/4 inches in length.
Melt a bulb into one end of the cord ( this will raise the percentage that it won’t come untied ). You may flatten the bulb against a lighter’s
metal housing to increase it’s diameter, but do not pancake it too thin to where it becomes brittle.
With the end you made the “bulb” on, tie a knot above your mark. Pull on the free end to ensure you have a secure knot.
Tie your finishing cinch knot so that your cord starts around the string opposite of the top sinch knot. Pull the free end snug but not
tight and cut your free end about 1/2 of an inch from
the bowstring.
Create a bulb on the free end with your lighter and pull the “D” part of the loop with a release to tighten the bottom knot.
Note:
It may appear to be too small at first, but it will stretch. The D-Loop only has to be big enough to accept your release’s head while not contacting the arrow’s nock. You can also precut the cord and melt both bulbs at a measurement that works for you. A common measurement that results in a perfect
D-Loop is 4 1/4 inches from end of bulb to end of bulb.
Package includes:
2 meter D loop rope
On Dec-26-21 at 19:14:11 PST, seller added the following information: